Get a Free No Obligation Quote

Need an engineering design for a retaining wall in Bedford Texas.

Overhung 3 season porch has cracked drywall on all three sides at the window corner, door and at a receticle. There is a deck which is attached on two sides with lag bolts to the house and to the porch. Happen this winter. Need to know what is wrong with stantion foundations and what fix is. House is 2 family condominium/duplex type.

Elevating a house in the 1% flood zone along the Cedar River in Waverly: The house is one story frame construction with brick facing, about 1600 square feet. There is a four foot high crawl space with no floor.

I need to get a basic floor plan (low cost) for living space for 1970 modular home. We recently had contruction for a roof because existing room was leaking. In North Shenango Township' Pennsylvania (Crawford County) required a floor plan with typical section. Can you please send me a quote. The township is required a Pennysylvania certified engineer. If you can send this by email....

130 unit condominium complex with 10 buildings on 9 acres of property. Complex was completed in the mid-1980's. The Condo Bd. is looking for a comprehensive review of the complex in order to be able to prioritize capital projects for the next ten years. We want to know what the problems are, an indication of useful life of assets, and a sense of the cost of remediation.

I need a simple quote to survey the location of 24 light poles in a new parking lot. Job location is Grand Canyon University on 33rd Avenue & Camelback.

(1). I need to find a civil engineering firm that performs noise analysis work and designs sounds walls. Please call if this is you. (2). I need a bridge design engineer with TxDOT style experience. (3). I need a CADD operator that knows MicroStation and GeoPak use for cross-sections, etc. on highway projects.

Need a geotechnical report for doing building west of existing ocean front house near Arch Cape, OR. Report needed to get building permit from Clatsop County. Have geotechnical investigation done 9/17/83 by Engineer for beach front revetment which will be made available.

I will appreciate to have an estimate for the plans needed to build a small place of 4,700 sq ft. only for three offices. Thanks

Residential - 850-900 sq ft home - structural evaluation and/or repair of foundation. Very large crack at front porch. Need evaluation and/or repair to address the floors, sub-floors, floor framing and beam supports.

Need elevation certification for above property for mortgage company. Can you help asap?

Geotechnical services to create a soils report for Hon Dah, outside of Show Low. Need Geotechnical report within 10 days.

Perk test a property I have an offer on. Survey the property. Plan A septic.

Need and engineer for fixing a broken dam on a residential pond.

I need a quote for a wetland delineation and habitat assessment for High Rocks Park in Gladstone Oregon. I will also need engineering services to design restrooms and a pedestrian path.

I had an 18 X 21 foot Carolina carport installed and decided after installation to enclose the front and back and install an automatic grage door. The work is done but the county won't give me a permit because it is not "engineered". I need someone to verify that the work was done properly. In order to get a permit in Levy County. Garage is at Oak Grove Village on Hwy 339.

I need an estimate from a stuctural engineer for submitting plans and specifications on building a fire wall. We are remodeling the old farm co-op building in Paragould and turning it into a restruant, pool hall and bar. This building was Hogans bar for the past 6 years and he must have grandfathered in or slipped though the cracks from the inspectors. This is a good building made of block and concrete...

I have a beam running the lenght of my house. I would like to remove one of the posts supporting the beam to create a 20ft span. I will need a method to support the span along with plans to submit to the county for approval.

Stamping our mbs pre engineered steel building plans.

Need bridge or culvert to cross creek to build house. The creek is about 6 feet across, 4 feet deep and has a retaining wall on the road side of a city street.

Camp to be built on Pleasant River Milo Me looking for Engineering company to assist.

We are building a new home and shop (steel building) in Blythe, California and are in need of a civil engineer who can work with our soils engineer.

Mason County requires a Floor Plan of my property at 60 E Ash-wood Lane, Shelton, WA. Originally it was a one floor 24' X 24' cabin. My Dad added a 3 story addition in 1969. My Brother added a garage on the other end in 1970, and extended the width of the cabin. The Planning Dept requires a drafted Floor Plan before they will allow the roof to be completed. We started re-roofing in July. My...

Cochise Co AZ. Soil sample and septic design. I am building a cabin and I am at the "permit phase". The property is .85 acres. The cabin is going to be a 14' x 24'. 1 bathroom and 1 small kitchen for 1 person.

Please give me a quote for a computerized devised retaining wall 55 ft. long and 3 to 4 ft. high. Need the engineer to draw up the plans because of the slope at the top.

Need a soil analysis on a piece of property in Indian Hills Lake in Cuba Mo. for a real estate sale within the next 25 days will be payed at closing on / or before Dec. 1 2010 (negotiable) through Crawford Co. Title

I am looking for someone to do a foundation inspection on a manufactured home for a refinancing. They said we would need a licensed engineer to do the inspection and gave me some specific information that would need to be included in the report.

We are planning on enclosing our lanai and have been advised by Permitting that they require plans for the design. The existing lanai (14’ x 16’) is under truss. We want to enclose it to create a room for pets. If you would be interested in assisting us, please contact me. I work for CCPD and am on shift today, so please leave a message if I am unable to answer the phone. Thank You, Cathy

Hello, I have come up with a product I am looking to get quotes for. It is about the size of a remote control and requires hardware and electrical engineering. It will deal with removable memory and will require wireless capabilities. Please let me know if this is something that you are able, and interested in doing. Before details will be given out you will need to sign an MNDA. Thank you Josh

I need the following engineering drawings of electrical work that has already been done in a commercial building (600 sq ft). 1. A complet one line riser diagram of main service – a. A list of every appliance with the volts, watts, amps, b. The size of every braker and size of each wire 2. Diagram of sub meter and interior panel 3. Complete panel schedule 4. Conductor sizes for all above

Structural review of a single story, single family home of approx. 3,300 sq ft. And garage. Also need spec for a 9' high concrete foundation of either 8" or 10" thickness.

2.5 years ago we had our house built. When the foundation was poured, a footing drain was installed along with a tightline for the roof water. Apparently the footing drain was not deep enough. Now the house, electrical, septic all that is done and we discover water, like two inches of water under our house in the crawl space...How do we handle this water? We need some professional consultation as...

Modification of conventional electric air cooler to photovoltaic air cooler.

Looking to put in a bridge over north fork hughes river - 104 foot span bank to bank.

Design of a single story building foundation in the fort worth area ( Zip 76140). Soil test report available.

Single story building foundation in the fairfield, CT area.

Jefferson co requires a percolation test to see where i can install my septic tank.

I am living in a high-rise aparment builing (around 15 floors which is built in 1950s). I am on the lowest floor. Once I moved in the apartment, I have seen soap studs coming into my kitchen sink from the drain pipe, and this happened every day. The landlord has snaked the drain/sewer pipe and it will not stop the issue. May I know whether this situation is normal for a highrise building and what else...

We would like to know if you would be interested in quoting the electrical infrastructure for a subdivision in Bogota, Colombia. There will be 73 lots, average house is 3000 Sq.ft, Street light every 75 to 100 ft, a sales office, and possibly misc elect. Demands. What we need to know is prmary cable and sizes, number of transformers and sizes. There is approximately 6000 ft. Of roadway. I know you...

I was inquiring if your company does work like looking into location of a sewer line along a riverbank. We need to find where this lies and are looking to get pricing ahead of doing such a task. This is for a property located in N. Chelmsford, MA. Please advise. Thank you,

Va appraisal came back- apparent hydro pressure structural engineer report of foundation required and repair except the apparent hydro pressure was from a busted pipe which has been fixed so i need the report to appease the va.

Estimate damage under cracks in ceiling of sunroom in home under contract, to determine whether cracks are related to weather, or if there is damage underneath.

I need a drawing for the conservations department for the connection of the house to the town sewage line - gravity fed. It crosses a creek, the conservation department preapproved it. The sewage line runs on my right-away which is also my driveway.

Need a phase 1 study on a building 4200 sqft built in 1996 in lake wales Fl.

I need an electrical engineer to establish and layout a 6300 sq. ft. building for a startup company. The building will be used for a small plastic processing facility involving several machines and an office area.. The layout must be made by a certified electrical engineer to obtain a building permit.

Client is wanting to list their home for sale. I am their realtor. We need to have their concrete block basement wall checked to see how sound it is. We had it listed before and an inspector had noted the wall boed out. The owner took down the drywall, tried to repair it himself, and put drywall back up. Is it possible to check it or does the owner need to tear the drywall back off? What is the charge...

I am planning to build a house in White Oak Estates which is about two miles EAST of the Woodlands, Texas, and would like to build on a Crawl Space foundation. I have the lot prepared and have had the soil tested, and can send the report, along with the house floor plans. Let me know if you can help.

I have a borrower who is in need of a structural inspection required by FHA for refinancing his home with a 203k. The home is located in Geneva, FL.

I need an estimated cost to perform perk test on land to prepare for construction. The land is on Apple Mountain West, Front Royal Va 22630.

To get a permit to mount solar panels on a roof, Prescott requires information from an arizona licensed engineer specifying that the new loads will not have any adverse affects on the roof. So I need a quote on what is needed to meet this requirement.

Design request for boat transfer system - St John's Landing Community. I’m a member of a waterfront neighborhood who looking for a firm to design a boat transfer system between a fresh water channel system to the St Johns river. We are looking for some type of rail system to move the boats back and forth…. If this is something your firm would be interesting in designing please contact me. ...

We own the Canyon View Manufactured Home Community located at 780 W 1125 N. The project was originally approved for 130 spaces, of which 70 are built out. We are contemplating a lot split on the undeveloped 7 or 8 (apx) acres that we have left and rezoning that land for either apartments or condominiums. We would like to get some information about how your firm could be of assistance in helping...

I have a 70 foot tower/ w a 36 inch face supported by a foundation of concrete and reinforced rebar constructed 3 years ago. I need to add another 20-40 foot to the tower. The city is requiring that I get an engineer to give us a letter stating that the concrete foundation will hold the additional height. The company that constructed my tower said it would but he is not an engineer. He just fabricated...

Storm water certificate for a 20' x 20' pole barn for equine use. Level 2.16 acre land located in Gresham, OR.

I want to buy a lot but want to make sure that it would pass the perk test. The land is in inglis, florida on n. Nighthawk ter. What is the cost for the test and what would i need to do to be ready for the test?

Building plans for mobile home roof 1981 Peerless - single wide manufactured VIN 09L17623 Series Body 70/14 collapsed roof/ceiling need weight ratios and details required to obtain permits.

I need an engineering report to prove that a slab crack is nonstructural. It's 22 feet long in my living room, and 1/8 wide at worst, no movement in 20 years.

My company was looking for a structural inspection quote for a commercial building on 39th street in New York City. The building is 5 stories high, approximately 22,000 sf and is on a 50 x 100 lot.

Design of dry fire hydrant and intake pipe to supply lake water for emergency water supply for firefighters. Residential service. Immediate design attention needed.

Need quote for a Soil Analysis for a residential foundation design - two borings.

For a retaining wall already built on property in Regal Ridge. Need for a permit. The concrete contractor didn't get a drawing or pull a permit. The wall joins a neighbors wall and he had a drawing which i thought was for both but building dept. of polk county says i need my own. The cement contactor was Earl Powell and he will furnish the specs on it. It does have a footing and steel in it.

My mobile home in Odin, IL, Royal Lakes, 62870, has been extensively damaged. Can your company provide me with a written assessment of the damage and probable cause? Also, can you recommend someone to make repairs? I can meet you at the site. Thanks in advance for any assistance you provide.

Survey and stake 20 acres of land on Iron county Utah close to beryl junction.

Requirements for building a single floor structure near the top of steep (4' drop in 2', 38 ' length) slope. When do I need footings?

Review/ Georgia PE stamp plans for Henry County permit to install used pallet rack in McDonough, Ga.

Have a project that was exposed to weather. Joists are covered with mold. They have been dried and I can remediate the mold issue. My question is can you evaluted them for structural stability? If so what would that cost. The project is in Bergen County. I can send pictures. Thanks, George

I own a property at 1709 Waverly Rd, Tn Ridge, TN 37178. The bridge on this property is in need of replacement. I am in need of help with permits, design, and construction of this project.

Used system re-engineer required by the city to re-install previously operational system on new building. About 20 PV panels and Sunny Boy SB6000U inverter. Looking for a low-cost quote for a "boiler plate" job. Can you help me?

I am purchasing a mobile home and need to get a structural engineers report I'm not sure if you do that but i would appreciate it if you could let me know.

Need a quote for civil plans to add storm water retention for City of Houston. The plan needs to account for 0.20 cubic ft/square ft x 30.25f x 40.25ft = 243.5 cubic feet of storage volume. The property is 17000 sq ft and therefore we need new plans with this added for a building permit.

Needs a civil firm that is licensed in Louisiana to put together site plan, bench marks, and architects model into a single dwg.

Property boundary search, survey and staking of our residential property. Approximate lot size is 2 acres on Gregory Lane in Sobieski. Subdivision being done behind us, they are looking on our property for boundaries.

I need an engineer to do an inspection of sewer line cut and city told me to get a civil engineer to verify damage.

Looking for an engineering company that could create an athletic shoe that has more spring than a conventional running shoe. It would allow a runner to run much faster by using the energy when the compression hits the floor, then rebounds. Large capital investment.

Compare GPM water volume through open 1" Ball Valve compared to GPM water volume through open 1" Ball Valve + open 1" Solenoid Activated Valve at several but identical GPM settings for municipal provided potable water. Thank you.

The KIngs House Ministry Church wants to add a 30x40 lightweight steel annex to a present building. There is a drain a few feet away from the proposed new slab; the drain services a portion of the parking lot. The drain does down about 8' and then back under the proposed new slab. Dekalb County has to have a land development plan prior to issuing a permit. We need a civil engineer to create this. Please...

I have a product that will need a mechanical machine to produce it. I need to speak/see someone to see if it's worth the cost/effort? Please communicate via email. Greg

Have drawn dimensions for leveling of 1 story brick home. Pier depth and placement drawn in. Need plans looked over and stamped in order to pull permits.

Structural damage to my house for insurance claim.

I need a post construction wind brace inspection. The extior is sided. The interior is exposed. This is at 705 Guadalupe river road (drive) Calhoun county 77990. The structure is 13' in the air withe 8" sch 40 steel pipe buried 8' into the ground. We have braced the pipe with angle iron, laged the metal structure through the subfloor and trust the rafers and roof two different directions.

Medical device entailing multiple pumps, liquid delivery tubes, gears rotatating components, demonsrating liquid flowing through tubes, multiple embodiments etc.. Demo: components being removed from other components. Must be enabled with capability of my narration within demo as well as pointers pointing to specific areas within the demo. Non disclousure required, on patent pending device. Small entity:...

We want to put a addition roof over our patio. 14x15. No walls.

I have a store in Fresno on 2990 Central Ave. One of our driveway entrances on Chestnut ave. was blocked after the bridge was built. I need a design build price to reopen in entrances. County may require installation of a sidewalk and turning lanes.

I'm interested to know how much it would cost to obtain a comprehensive listing of electrical and mechanical engineers located in Louisiana. I would like the information to include number of employees, core markets and sales volume. Please advise.

I need a quote for residential bridge construction. The bridge should be over a stream. Thank you.

I have a small home in San Leandro, CA and I need the foundation inspected by an Engineer's Report on this matter before sale of the home.

We are looking to develop 20 acres of Commercial Retail space in Palm Coast. We are looking for an engineering company with capabilities to take project from planning to conclusing.

To evaluate leaning piers not supported by concrete footing and in home 100 years old, 1000 sq ft approx. Cost to repair, very small crawl space. Please reply by email, thank you!

High wind certification for replacement of HVAC rooftop units in Greene Co, this is a structural condition that needs your advise, this for the McDonald's resturant in Detroit steet in Xenia.

I would like a quote on supplying the plans for a metal building that already excist.. And need plans to convert to a residental building. I would like to have a quote as soon as possible being as the county has a violation placed on the building.

Approx 12'x20' area. It will be built off a manufactured home.

Looking for an analysis of noise level increase and it's effect on property values when a highway, ajacent to the property, is increased from 2 lanes to 5 lanes.

Need cost estimate for Perk test for septic tank installation.

I need structural engineering work for a partially build, steel-barn/shed 'kit'; size is 850 square foot. Project is located outside of Casa Grande on a private residence on county property. Need local engineeing companies only.

Who do I call to get information on having a perc test done on some property I own in Federal Way, Wa and how much would it cost?

I worked in Electrical Engineering for Triem Electric Motors for 9.5 years. I am looking for an Engineering Technician or Engineering Apprentice position.

Need a stamped foundation plan for a 30'x30' one story garage to complete the City of Denton permit requirments for the building. Pdf plan for building available.

Need someone to come out and access home damage due to the storms. We believe we have structural damage to our home.

HVAC engineer inspection - not a new home. New construction which we feel was not set up properly. Two vents by the windows don't work. There are two additional vents not on an outside wall which do work. The builder tells us this is sufficient, but we (there are four units in the condominium with the same problem) feel it's not.

Need to put in individual panels for 9 unit apartment complex which was built without the individual meters in Surprise Az.