 Personable and well-educated professional with valuable, hands-on experience seeking a challenging role in the chemical industry as a Process Engineer.

SUMMARY OF QUALIFICATIONS

 Process Engineer with a proven track record of solving problems and working well on teams.
 Acquired nearly two years experience while interning for a petroleum company in India, gaining in-depth knowledge of oil and gas safety management; JHA; PSM & PHA; and operational procedures.
 Played a key role developing BFD, PFD’s, P&ID’s and mass balances for a “Diesel Hydro-Treating Unit (ULSD) of 2.2 MMTPA capacity.
 Worked collaboratively to help design simulation using Aspen Hysys v7.3 software.
 Proficient with Microsoft Office Suite and Visio; MATLAB; Simulink; AutoCAD; ChemCAD; Minitab 17; Aspen Hysys v7.3; UniSim; and Aspen Plus.
 Strong understanding of PLC programming, including RSLogix 1000; Ladder Logic; Flarenet; KG Tower; Pipesys; and Korf Hydraulics.
 Solid familiarity with SPC; DMAIIC; Control Charts; CI; Cause & Effect Analysis; Root Cause Analysis; FEMA; Pareto Analysis; Kaizan; and 5S.
 Stellar knowledge of design: refrigerated gas plant; TEG dehydration; LNG plant; NGL fractionation; and Propane Refrigeration.

EDUCATION

Master of Science, Chemical Engineering, University of Florida; earned May 2015 (3.63 GPA)

Bachelor of Engineering, Chemical Engineering, University of Mumbai; earned June 2012 (3.72 GPA)

CERTIFICATES

 Advanced Process Engineering Certified, Omesol; earned June 2015
 Oil & Gas Safety Management, Introduction to Process Safety Management Certified, Occupational Safety and Health Administration (OSHA); earned May 2015
 Six Sigma Green Belt Certified, Institute of Industrial Engineers; earned Jan. 2015
 Aspen Hysys v7.3 Process Modeling Certified; earned Jan. 2013

HANDS-ON ACADEMIC PROJECTS AND ACTIVITIES

Process Design Engineer, University of Florida
Oct. 2014-Dec. 2014
 Boosted hydrogen production 3% and decreased carbon dioxide 6% after using ChemCAD software to simulate the “Production of Hydrogen by Steam Reforming of Natural Gas.”

Process Improvement Engineer, University of Florida
Jan. 2014-Aug. 2014
 Increased efficiency 15% and voltage of fuel cell by 5V after using MATLAB & Simulink software to engineer and implement a multivariable and multi-loop PID Controller and a Cascade PID Controller for a direct methanol fuel cell; also developed own code for to tune PID Controller.

Oral Presentation, University of Florida Chemical Symposium
Feb. 2014
 Displayed outstanding knowledge and expertise while leading a discussion on the topic of “Dynamic Modeling of Fuel Cells.”

Teaching Assistant, Chem-Bio Lab & Unit Operations Lab, University of Florida Aug. 2013-Dec. 2013

HANDS-ON INTERNSHIPS

Process Engineer, Hindustan Petroleum Corp. Limited – Mumbai, India July 2011-May 2013
 Acquired in-depth knowledge of oil and gas safety management; JHA; PSM & PHA; and operational procedures equivalent to OSHA standards, as well as valve, compressor, cooling tower concepts and selection criteria and standards.
 Played a key role developing BFD, PFD’s, P&ID’s and mass balances for a “Diesel Hydro-Treating Unit (ULSD) of 2.2 MMTPA capacity.
 Worked collaboratively to help design simulation using Aspen Hysys v7.3 software.
 Conducted hands-on design calculation for Distillation Column and Heat Exchanger.
 Performed software-based modeling of Flare System (Flarenet); Distillation Column (Aspen Hysys/KG Tower); Heat Exchanger; Line Sizing; and Hydraulics (Pipesys/Korf Hydraulics).
 Suggested HAZOP Analysis on HP Separator, Shell & Tube Heat Exchanger and Amine Stripper Column, and helped design and perform calculations for HP Separator and Stripper Column.

Process Engineer, Hindustan Unilever Limited – Mumbai, India
June 2010-Dec. 2010
 Helped improve the flow of raw materials into a Plough Shear Mixer by providing three economical solutions to keep vent line velocity at 1m/s.
 Completed analysis that would decrease electricity use by 3.4 KW/hr when indirect-direct evaporative cooling technology is used.
 Created batch sheets with Standard Operating Procedures (SOP) to manufacture detergents.

Desired Salary

70000

Total Experience

2 years

Year of Birth

1990, male

Currently Employed

No

Name & Surname

Zuber Ahmad Kampli

Phone Number

3528715086

City & State

Houston, Texas

Street Address

4010 Linkwood Drive , Apt. No. 927